dustylumberco

Some @Titebond Products dark and some dominos and long clamps to glue some tool shelves together #construction #woodwork #work

Woodwork is mostly removing the wood you don’t want as precisely as possible with whatever tools you have or choose to use #woodwork #tools #maker

Cutting lock mitre joints on the King shaper with the help of the @Bow Products feather boards and push stick and the @FreudTools cutter #woodwork #construction #tools

#ad Shifted the @Southland Trailer Corp. gooseneck inside the shop with the JCB teleskid so I could install an Erickson winch on the front of the trailer to make it easy to pull ok old vehicles or tractors or whatever else needs to get pulled on 👍. Really nice that @southlandtrailers already had a place ready for winches and the holes already pre drilled, I was able to put the bolts in and tighten them all down with the @Einhell Canada impact gun. I will probably mount the battery on the cabinet but for now wanted to just hook it up and make sure it all worked #trailer #construction #build #maker

Building the new workshop part 1! There are limits on video lengths so I will post in segments #construction #work #workshop

#ad A cordless planer is always a nice tool to have around! This is the @Einhell Canada 18v planer and attachments for planing and cutting rabbets or rebates 👍 #woodworking #tools #maker

#ad Using @Titebond Products Instant Bond to repair a shovel that has a piece cracking off that catches your hand when you use it #construction #work #glue #tools

Chisel work to clean up the corners so they fit into the mortises #woodwork #chisel #joinery

#ad Fresh @FreudTools blade to cut some test pieces on the King RAS for a post and railing idea for the stairs and mezzanine in the shop #freudtoolsambassador #construction #tools #woodwork

Ok this section of the workbench/tool wall is not done yet, there is still several things to do like putting a backing on so I can hang tool accessories and put in all the lighting and signage and put a finish on it but since I’m kind of shooting from the hip I needed to get it moved into place so I could stand back and look at it and see how it’s shaping up and if I need to make changes (there have already been a few changes as I’ve built it as things look different in real like than in my head sometimes) Also all these @Festool Canada tools will not all go on this one section like this. They will eventually be spread out more (similar to my last shop) and each have space in the section behind them for the most used accessories but I really needed to get tools up off the ground and little more organized while I keep working on getting more organized. This whole section under the mezzanine has been an absolute gong show with tools in boxes spread out all over the place making it hard to get things done and find the tools I need so at least this helps me be a little more organized and I got all the rest of the tools up on temporary tables so I can work a little more efficiently. #woodwork #workbench #tools

Festool tool bench number two getting moved into position. Still mostly figuring it out as I go, I knew that I wanted each tool to have a certain amount of elbow room and room for the most used accessories to be in the area of the tools they go with so I’m starting to spread them out and test where each tool should go and try anticipate spacing for accessories. Right now I think the second shelf will be mainly for the accessories of the tools on the bottom level and then the top will be reserved for the bigger tools that don’t have many accessories but I still will probably change my mind. I will also put a special perfo backing behind the shelves to hang and organize all the accessories on and still need to put a finish on the whole thing and I’m thinking some metal accents and some signage and the lighting I have planned. #construction #workshop #woodwork #festool @Festool Canada

#ad Cutting out the doorway baseplates out with the new @Diablo Tools demo demon carbide tipped recip blade 👍 #diablotoolsambassador #tools #construction

#ad One thing I love about @Festool Canada is how all the tools work together as a system to get things done precisely, efficiently and as clean as possible so there isn’t as much of a mess to clean up after #woodworking #tools #festool

#ad Unboxing the new shop planer! This 2700 lbs monster is the @SCM North America Class S 630 with a 15 HP three phase main motor! It has a 24.75” Xylent cutter head which is super quiet and efficient and can take off up to 5/16” of material at a time! 105 cutter inserts in three rows of cutters! Precision electronic raising and lowering of the bed with pneumatic roller adjustment for perfect cutting and all built into a superior mono block frame! Oh and a max cut height of 11.8” which is perfect for the bigger timbers I’ll be using in the new house! #woodwork #tools #construction

#ad Fresh box of 14x140mm @Festool Canada dominos and some @Titebond Products original to get another tool bench section built 👍 #woodwork #maker #festool

I hooked onto the @Southland Trailer Corp. Royal Cargo trailer to go help my friend @WayneDick move his 1936 Ford 3 window coupe! Very cool and rare old car. If you’re into old vehicles and cool builds Wayne builds some amazing stuff! @Blaklader Workwear #trailer #classiccars #restoration #ford

#ad Continuing getting the new shop set up with this @SCM North America MiniMax TW 55ES shaper! This is a three phase 8 hp unit with a tilting spindle that can take up to about 9 1/4” cutters and if I switch to the tenoning mode it can take tenon cutters up to 12.5”! #woodworking #maker #workshop

This is the @mafell.de_offiziell chain mortiser!!I have had my eye on one of these for quite awhile and even have a dedicated spot in my shop where I had my electrical run two 220v line for these big motor machines from Germany. I plan to do a lot of timber framing work in the new shop and Mafell has the most amazing big timber framing tools so I made space for it and ran power for this and several more Mafell tools I plan to get 👍 #woodworking #tools #timberframe

#ad Grabbed some @Titebond Products original to glue up the first part of the tool wall/ organization system I’m working on #woodworking #tools #maker

#ad Using the @Festool Canada TS 60 to rip this butcher block in half and then the FSK track to set the two angle cuts to match them up for a long shelf #woodworking #festool #tools @Blaklader Workwear